StarFighter Mk I

Specs

• CPU (full processor specs available at https://ark.intel.com)

  • Intel i3-1315U (Raptor Lake)

  • Intel i7-13700H (Raptor Lake)

  • Intel i9-13900H (Raptor Lake)

• EC

  • ITE IT5570E

  • Backlit keyboard, with standard PS/2 keycodes and SCI hotkeys

  • Battery

  • USB-C PD Charger

  • Suspend / resume

• GPU

  • Intel® Iris® Xe Graphics

  • GOP driver is recommended, VBT is provided

  • eDP 16-inch 3840x2400 or 2560x1600 LCD

  • HDMI video

  • USB-C DisplayPort video

• Memory

  • 16, 32 or 64GB LPDDR5 on-board memory

• Networking

  • AX210 2230 WiFi / Bluetooth

• Sound

  • Realtek ALC256

  • Internal speakers

  • Removable microphone

  • Combined headphone / microphone 3.5-mm jack

  • HDMI audio

  • USB-C DisplayPort audio

• Storage

  • 2 xM.2 PCIe SSD

  • RTS5129 MicroSD card reader

• USB

  • 1920x1080 removable CCD camera

  • 2 x Thunderbolt 4.0 (left) (Raptor Lake)

  • USB 3.1 Gen 2 Type-A (left)

  • USB 3.1 Gen 2 Type-A (right)

  • USB 3.1 Gen 1 Type-A (right)

Building coreboot

Please follow the Star Labs build instructions to build coreboot, using config.starlabs_starfighter_rpl as config file.

Preliminaries

Prior to building coreboot the following files are required:

• Intel Flash Descriptor file (descriptor.bin)

• Intel Management Engine firmware (me.bin)

• ITE Embedded Controller firmware (ec.bin)

The files listed below are optional:

• Splash screen image in Windows 3.1 BMP format (Logo.bmp)

These files exist in the correct location in the StarLabsLtd/blobs repo on GitHub which is used in place of the standard 3rdparty/blobs repo.

Build

The following commands will build a working image:

make distclean
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_starfighter_rpl
make

Flashing coreboot

Type	Value
Socketed flash	no
Vendor	Winbond
Model	W25Q256.V
Size	32 MiB
Package	SOIC-8
Internal flashing	yes
External flashing	yes

Please see here for instructions on how to flash with fwupd.