StarBook Mk VI (Ryzen 7 5800U)

Specs

• CPU (full processor specs available at https://www.amd.com)

  • AMD Ryzen 7 5800U (Cezanne)

• EC

  • ITE IT5570E (Star Labs Merlin EC)

  • Backlit keyboard, with standard PS/2 keycodes and SCI hotkeys

  • Battery

  • USB-C PD charger

  • Suspend / resume (S3)

• GPU

  • Integrated AMD Radeon Graphics

  • eDP internal display

  • HDMI video

  • USB-C DisplayPort video

• Memory

  • 2 x DDR4 SODIMM

• Networking

  • M.2 2230 WLAN (PCIe)

  • Bluetooth (internal USB)

• Sound

  • Conexant CX20632 (HDA)

  • Internal speakers

  • Internal microphone

  • Combined headphone / microphone 3.5-mm jack

  • HDMI audio

  • USB-C DisplayPort audio

• Storage

  • M.2 2280 NVMe SSD

  • M.2 SATA SSD

  • Micro-SD card reader

• USB

  • Camera (internal USB)

  • Fingerprint reader (internal USB)

  • USB 3.x Type-A ports (left + right)

  • USB Type-C port (USB + DisplayPort alt-mode)

Building coreboot

Please follow the Star Labs build instructions to build coreboot, using config.starlabs_starbook_czn as config file.

Preliminaries

Prior to building coreboot the following files are required:

• AMD Cezanne PSP/SMU firmware binaries (used by src/mainboard/starlabs/cezanne/fw.cfg)

• ITE Embedded Controller firmware (ec.bin)

If you enable CONFIG_ADD_APCB_SOURCES, additional APCB files are required (see src/mainboard/starlabs/cezanne/Makefile.mk).

The files listed below are optional:

• Splash screen image in Windows 3.1 BMP format (Logo.bmp)

These files exist in the correct location in the StarLabsLtd/blobs repo on GitHub which is used in place of the standard 3rdparty/blobs repo.

Build

The following commands will build a working image:

make distclean
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_starbook_czn
make

Flashing coreboot

Type	Value
Socketed flash	no
Vendor	Winbond
Model	W25Q128JW
Size	16 MiB
Package	SOIC-8
Internal flashing	yes
External flashing	yes

Please see here for instructions on how to flash with fwupd.