StarBook Mk V¶
Specs¶
- CPU (full processor specs available at https://ark.intel.com)
- Intel i7-1260P (Alder Lake)
- Intel i3-1220P (Alder Lake)
- Intel i3-1315U (Raptor Lake)
- Intel i7-1360P (Raptor Lake)
- EC
- ITE IT5570E
- Backlit keyboard, with standard PS/2 keycodes and SCI hotkeys
- Battery
- Charger, using AC adapter or USB-C PD
- Suspend / resume
- GPU
- Intel® Iris® Xe Graphics
- GOP driver is recommended, VBT is provided
- eDP 14-inch 1920x1080 LCD
- HDMI video
- USB-C DisplayPort video
- Memory
- 2 x DDR4 SODIMM
- Networking
- AX210 2230 WiFi / Bluetooth
- Sound
- Realtek ALC269-VB6
- Internal speakers
- Internal microphone
- Combined headphone / microphone 3.5-mm jack
- HDMI audio
- USB-C DisplayPort audio
- Storage
- M.2 PCIe SSD
- RTS5129 MicroSD card reader
- USB
- 1920x1080 CCD camera
- USB 3.1 Gen 2 (left) (Alder Lake)
- Thunderbolt 4.0 (left) (Raptor Lake)
- USB 3.1 Gen 2 Type-A (left)
- USB 3.1 Gen 1 Type-A (right)
- USB 2.0 Type-A (right)
Building coreboot¶
Please follow the Star Labs build instructions to build coreboot, using config.starlabs_starbook_adl as config file.
Preliminaries¶
Prior to building coreboot the following files are required:
- Intel Flash Descriptor file (descriptor.bin)
- Intel Management Engine firmware (me.bin)
- ITE Embedded Controller firmware (ec.bin)
The files listed below are optional:
- Splash screen image in Windows 3.1 BMP format (Logo.bmp)
These files exist in the correct location in the StarLabsLtd/blobs repo on GitHub which is used in place of the standard 3rdparty/blobs repo.
Build¶
The following commands will build a working image:
Alder Lake:
make distclean
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_starbook_adl
make
Raptor Lake:
make distclean
make defconfig KBUILD_DEFCONFIG=configs/config.starlabs_starbook_rpl
make