Supermicro X11SSH-TF
This section details how to run coreboot on the Supermicro X11SSH-TF.
Flashing coreboot
The board can be flashed externally using some programmers. The CH341 was found working, while Dediprog didn’t detect the chip.
The flash IC can be found between the two PCIe slots near the southbridge:
BMC (IPMI)
This board has an ASPEED AST2400, which has BMC/IPMI functionality. The BMC firmware resides in a 32 MiB SOIC-16 chip in the corner of the mainboard near the AST2400. This chip is an MX25L25635F.
Tested and working
USB ports
Ethernet
SATA ports
RS232 external
ECC DRAM detection
PCIe slots
M.2 2280 NVMe slot
BMC (IPMI)
VGA on Aspeed
TPM on TPM expansion header
Known issues
See general issue section.
Technology
CPU |
Intel Kaby Lake |
PCH |
Intel C236 |
Coprocessor |
Intel SPS (server version of the ME) |
Super I/O |
ASPEED AST2400 |
Ethernet |
2x Intel® X550 10GBase-T Ethernet 1x dedicated BMC |
PCIe slots |
1x 3.0 x8 1x 3.0 x2 (in x4) 1x 3.0 M.2 2260 x4 (Key M, with S-ATA) |
USB slots |
2x USB 2.0 (ext) 2x USB 3.0 (ext) 1x USB 3.0 (int) 1x dual USB 3.0 header 2x dual USB 2.0 header |
SATA slots |
8x SATA III |
Other slots |
1x RS232 (ext) 1x RS232 header 1x TPM header 1x Power SMB header 6x PWM Fan connector 2x I-SGPIO 2x S-ATA DOM Power connector 1x XDP Port 1x External BMC I2C Header (for IPMI card) 1x Chassis Intrusion Header |