# Star LabTop Mk IV ## Specs - CPU (full processor specs available at https://ark.intel.com) - Intel i7-10710U (Comet Lake) - Intel i3-10110U (Comet Lake) - EC - ITE IT8987E - Backlit Keyboard, with standard PS/2 keycodes and SCI hotkeys - Battery - Charger, using AC adapter or USB-C PD - Suspend / resume - GPU - Intel UHD Graphics 620 - GOP driver is recommended, VBT is provided - eDP 13-inch 1920x1080 LCD - HDMI video - USB-C DisplayPort video - Memory - 16GB on-board *1 - Networking - AX201 CNVi WiFi / Bluetooth soldered to PCBA - Sound - Realtek ALC256 - Internal speakers - Internal microphone - Combined headphone / microphone 3.5-mm jack - HDMI audio - USB-C DisplayPort audio - Storage - M.2 PCIe SSD - RTS5129 MicroSD card reader - USB - 1280x720 CCD camera - USB 3.1 Gen 2 Type-C (left) - USB 3.1 Gen 2 Type-A (left) - USB 3.1 Gen 1 Type-A (right) [^1] The Comet Lake PCB supports multiple memory variations that are based on hardware configuration resistors see `src/mainboard/starlabs/labtop/variants/cml/romstage.c` ## Building coreboot Please follow the [Star Labs build instructions](common/building.md) to build coreboot, using `config.starlabs_labtop_cml` as config file. ## Flashing coreboot ```eval_rst +---------------------+------------+ | Type | Value | +=====================+============+ | Socketed flash | no | +---------------------+------------+ | Vendor | Winbond | +---------------------+------------+ | Model | 25Q128JVSQ | +---------------------+------------+ | Size | 16 MiB | +---------------------+------------+ | Package | SOIC-8 | +---------------------+------------+ | Internal flashing | yes | +---------------------+------------+ | External flashing | yes | +---------------------+------------+ ``` Please see [here](common/flashing.md) for instructions on how to flash with fwupd.